Lisle Design - Solutions for transport




Digidown Plus Videos > Digidown Plus


On this page you'll find several videos demonstrating how the Digidown Plus functions and errors that may be encountered during use. These are also covered in the Digidown Plus Operations Manual which can be viewed by clicking here.

Click here to return to the Digidown Plus page.

If you can not see the videos on this page, please install Adobe Flash Player.




Correct Usage


Note: In order to download data from a vehicle unit, the company card must be inserted in the tachograph; not in the Digidown Plus.


All VU Download

Before the SD card is inserted the lights step smoothly from one to the next.

When the SD card has been inserted they will blink in turn; this indicates that the unit is ready to download data.

Pressing the All VU button will initiate the download and the All VU light will flash twice per second.

NOTE: The All VU download may take more than one hour to complete.

When the download has completed the All VU light will blink once per second.

The Digidown Plus can then be removed safely.



Latest VU Download

Before the SD card is inserted the lights step smoothly from one to the next.

When the SD card has been inserted they will blink in turn; this indicates that the unit is ready to download data.

Pressing the Latest VU button will initiate the download and the Latest VU light will flash twice per second.

When the download has completed the Latest VU light will blink once per second.

The Digidown Plus can then be removed safely.



Driver Card Download

When only the SD card is inserted, the unit does not draw any power.

When the Driver Card is inserted, the unit powers up and begins downloading the card data.

The Card light will flash twice per second while the data is downloaded.

The Driver Card may take over one minute to download.

The Driver Card is in correctly if the driver's head is visible on the card.

When the download has completed the Card light will blink once per second.

The Driver Card can then be removed safely.



Driver Card Download with USB connected

When the unit is connected to a computer with a USB cable the All VU and Card lights will be solid.

When the Driver Card is inserted, the unit disconnects from the computer and begins downloading the card data.

The Card light will flash twice per second while the data is downloaded.

The Driver Card may take over one minute to download.

When the download has completed the All VU and Card lights will turn solid again, indicating that the unit has reconnected to the computer.

The Driver Card can then be removed safely.



Errors


Solid light when downloading Driver Card

Driver Card Error

The unit remains off with just the SD card inserted.

When the Driver Card is inserted the unit powers up and begins to download the Driver Card data.

If the Driver card is inserted incorrectly, then the download will fail and the Card light will remain on.

To download the Driver card data successfully, the card should be inserted so that the Driver's head is clearly visible.



One solid light when downloading VU

VU Download Error

When the SD card has been inserted the lights will blink in turn; this indicates that the unit is ready to download data.

Pressing the Latest VU button will initiate the download and the Latest VU light will flash twice per second.

If the Digidown Plus encounters an error during download the Latest VU light will stay on constantly.

Check your Tachograph for errors.



Three lights flashing simultaneously

SD Card Error

When the SD card is inserted all three lights flash simultaneously.

This indicates an error with the SD card.

Possible causes are:

  • The SD card is locked.
  • The SD card is full.
  • The SD card is incorrectly formatted.


Digidown videos can be viewed on this page.


Click here to return to the Digidown Plus page

Back to top of page.


The videos on this page are displayed in Flowplayer using Flash. If you can not see the videos, please install Adobe Flash Player.